Products
Carriage is suitable for all profiles 20x20 as free-supporting solution and it is lubricated free.
The absorption of forces (moments) in all directions is possible
i.e. this slider is secured against rotation.
The clearance or the tolerance is continuously adjustable manually
(clearance is adjustable by using a small Hex wrench SW 1.5).
Reset button at the end faces for a new adjustment of the clearance.
For assembly of other parts there are 5 slots available and
8 special t-nuts M5 for the large slots are included in the delivery.
Optional accessories:
2 slots above, one slot on each side, mounting by a threaded plate slot 6 B-type
and a slot on the bottom, mounting with hexagon nut DIN 439 M5.
Use as smal gripping unit for laboratory equipment for example.
Performance of the carriage:
maximum permissible torque: 10 Nm
Dimensions:
Width 45mm, length 81mm and a weight of 0.21 kg
Distance of the center of the upper slots is 16 mm from each other,
Distance lateral slots: center of the slotsto the center of the carriage is 8mm
The lower slot is arranged in the middle.
